Bandsawing Machines
The rigid construction has doubled the cutting speed compared with conventional machines.
| product name | UGA260Ⅲ | UGA330Ⅲ | |
|---|---|---|---|
| product photo |  |
 |
|
| Max. Capacity(W×H) |  |
260 mm | 330 mm |
 |
260 mm | 330 mm | |
 |
300×260 mm | 330×330 mm | |
 |
300×150 mm | 320×160 mm | |
| Overall Dimentions (W×D×H) |
1900×2076×1781 mm | 2250×2180×2012 mm | |
| Machine Weight | 1800 kg | 2650 kg | |
The UGAⅢ series adopts a rational design portal structure of the saw frame to increase the rigidity that was lacking in conventional machines. By bringing the linear guides closer to the saw blade, the cutting process can be controlled more accurately and forcefully, realizing higher speeds when cutting and beautifully cut surfaces.
HIGH PRODUCTION MACHINE
The UGA Ⅲ series have doubled the cutting speed of conventional machines with an optimized feed rate by the amplifying valve.
BAR FRONT/TOP DETECTOR
In auto cycle, the first cut is made without manual positioning by detecting the bar front/top with the laser beam.
BACK GAUGE FUNCTION
By inputting the required dimensions and positioning the tip of the feed vise as a back gauge, it is possible to cut out products with
a length of 70 to 570 mm.
LINKED SAW GUIDE
The saw guide linked with the vise is always close to the workpiece, which ensures optimal cutting conditions.
BLADE DEVIATION DETECTOR
The blade deviation detector monitors the blade for any minor deviation to halt the machine during cutting.
INDEXING TABLE WITH ROLLERS
The material is smoothly fed on the index roller table that is designed to withstand the heaviest of material.
The wide vertical vises are adjustment-free. The bumpy bundle is evenly absorbed by rubber pads to clamp firmly.
The vise pressure can be adjusted for thin wall material.
Clean cutting environment is enabled with the mist applicator which sprays cutting f luid to saw blade edges. An air source needed.
Contact short workpiece to the mounted fixture. Two fixtures available for large or small material.
The operation panel can be placed on the left side of the machine.
While the machine is running, the winker lights up.
From each machine to total automation, contact us freely.
9:00~17:00: phone available
06-6489-1202(Head Sales Office)
